Why Is My Washing Machine Leaking

A leaking washing machine is something everyone fears. Leaks aren’t always noticeable right always and finding the source isn’t always easy. Water may appear in one area of the washer but the leak causing it could be in another part.

Washing machines are very complex machines and finding the cause of a leak may take some time and investigation on your part. If you decide to entrust the repair of your appliance to a specialist, the team of Repair Air can help you resolve the issue quickly and offer you a same or next day repair service.

problem with a leaking

What Do You Do With A Leaking Washing Machine?

First of all, keep calm and try not to panic, most leaks are going to be quite small so you won’t be faced with a huge spray of water.

Secondly, you might be able to repair the leak yourself so you can save the time and money it would take to call in a technician. So, without further ado let’s take a look at how you can go about finding and fixing leaks in your washing machine.

Safety First

Before you go searching about for the cause of the leak make sure your appliance is unplugged and you have full access to it. It might be a nuisance pulling your washer out but it will make the task ahead much easier.

Your appliance will also need to be on a level surface and make sure the taps are turned off. While washing machine leaks can be a little deceptive a leaking door, for example, doesn’t always there’s a hole of crack in it our guidelines below will generally help you find the sources of your leak.

If you follow our guide and still can’t find the source of the leak then your best option is to call in a Repair Aid technician.

Repairing your supply pipe leak

Water Is Leaking At The Front Or Back Of The Washing Machine

If water is pooling around the front or back of your washing machine then the most likely cause is a problem with the supply hoses. They may have a kink or hole in them or they might just not be connected properly.

If the hoses are too badly damaged then they will need to be replaced but if they have just become kinked or aren’t connected properly then readjusting them is quick and easy.

Rust Inside The Machine

Seeing rust or mineral deposits inside your washing machine is sure to concern anyone, thankfully the issue is almost always caused by your machine’s drainage hose. If the hose isn’t connected properly or is blocked then rust and mineral deposits are a common problem. Cleaning out the hose is simple enough and make sure the clamps are securely holding it in place.

Door Leaks

If the washing machine’s door is damaged in some way then water can easily leak through, so inspect the door carefully. If you can’t spot any crack or holes then the problem could be the doors seal, if dirt or grime as built up around the door then it won’t be fully shutting so water will seep through.

So, make sure the seal around the door is regularly cleaned, small articles of clothing and builds up of fluff and hair can also get stuck around the doors brackets. Door leaks can also happen if the appliance isn’t on level ground and if the water leaking through is soapy it could be because you’ve added too much detergent.

Leaks Around The Washing Machine’s Seals

Water beads or dripping leaks around your washing machine’s seals are a common issue and unfortunately, it’s usually a sign of age. While seals can be replaced and padded it will usually only be a temporary fix.

Leaks Under The Washing Machine

Water under your appliance can have a number of sources, water will often pool at the bottom of your appliance when it leaks. However, the most common cause will likely be the drain hose at the rear of the machine. It might be blocked, damaged or disconnected so inspect it carefully. You can find out more about dealing with drainage problems on our separate blog post.

Leaks At The Front Of The Machine

The most common cause of these leaks is problems with the water pump. Usually, it will be due to the seals degrading, depending on the extent of the damage you may need to get a replacement pump or a washing machine technician may be able to repair it.

Overflow After A Cycle

This one is easily noticeable, if you have an excess of foamy water coming out of the washer after a finished cycle then it will likely be because you have used too much detergent. This is much easier to do than you might think so be sure to follow the guidelines on your appliance to make sure you only use the recommended amount of powder.

Please remember that fixing electrical appliances without professional knowledge and skills can be very dangerous and you should never attempt to fix a broken appliance without having professional training. Please contact our trained washing machine repair technicians for help. To get in touch with Repair Aid, please call 020 7183 6944.

Major Appliance Brands We Repair